IP Multicast Configuration Notes

Anycast RP
06/01
Anycast-RP descriptionNEW
Auto-RP
2/99
Guide to Auto-RP Configuration and Diagnostics
9/98
Auto-RP Enhancements to 12.0
9/98
Where to place the RP in an Enterprise
11/01 Understanding and using the "ip pim rp-announce-filter" commandNEW
BGP / MBGP
3/00
Changed BGP/MBGP syntax for newer 12.0T, 12.1 versions of IOS
Broadcast Flooding
6/99
Multicast helper maps
CGMP
6/01
Constraining Multicast Traffic with Source and Receivers on the
Same VLANNEW
Basic introduction to CGMP and IGMP Snooping
8/00
How CGMP Leave Processing Functions
Detailed description of the CGMP leave process
DVMRP
Interoperability
11/97
DVMRP Conditional Flooding
Explains poison reverse operation support, "poison" output fields.
Generic
9/97
Recommended Configuration example
4/00
Recommended IOS Images for IP Multicast
HSRP and PIM
06/01
Why Doesn't PIM Sparse Mode Work with a Static Route to an HSRP Address?NEW
MPLS
2/01
MPLS Traffic Engineering and IP Multicast Interoperability
MSDP
7/99
MSDP and anycast RP
12/99
MSDP SA filter recommendationsNEW Always updated!
Explains how to reduce (S,G) state in interdomain PIM-SM utilizing MSDP.
Multipath 11/00 IP Multicast Multipath configuration note
NAT
10/98
Multicast-NAT
Non-RPF Traffic
06/01
Redundant Router Issues with  IP Multicast in Stub NetworksNEW
Describes how to solve issues with non-RPF traffic on Cat6x00/8x00
PIX Firewall
11/99
Tunneling IP Multicast through a PIX Firewall
QoS
6/99
Link layer fragmenation interleaving for real-time packets
Rate Limiting
6/01
Using ip multicast rate-limit to police ip multicast trafficNEW
RGMP
3/00
RouterPort Group Management Protocol
Tunnels
11/97
Multicast over GRE tunnels
TTL processing Using Applications with a Low TTL in a Dense-Mode, Multicast Environment 



URL: ftp://ftpeng.cisco.com/ipmulticast/config_notes/index.html
Owners: IP Multicast Development & Dev/Test Groups